|
Post by Meph on Jul 22, 2018 19:36:38 GMT
After quite a hiatus I am getting back in the game. I am prepping a 1E/2E Hybrid game (my old faithful) for my adult group starting up again in September. I am also planning a 5E group for my kids and a couple other's later this year also. In the past I have been all over the place with my printing, no real focus. I would print a couple cool pieces, then some other cool pieces, and before I knew it I had a bunch of individual pieces that didn't really go together. So no I am focusing. First up is to complete the cemetery that I began over a year ago. Primed it all today and I plan to get the based in "groups" so I can lay them out but i'm not laying out single graves as a time. Next up is going to be a full tavern. On the printer right now is a whole bunch of tavern pieces. As for the actual tiles I need to go through everything I have. I have backed 2 different Printable Scenery kickstarter/indigogo campaigns, both at the max levels so there were a LOT of files. I also backed Curufin's Truetiles at the max level and just backed Forest of Oakenspire at max level so I have a whole LOT of stuff not including the free stuff I have downloaded. The problem is I really don'd know what I have. curufin , maybe you can help me out. Was your tavern tile set included in the Truetiles kickstarter? I have a couple pieces printed as you can see in this photo but I dont know if that was something to test or what it was. Anyways, sit back an enjoy. I plan to start posting all of my stuff again. Been watching some Black Magic Crafts also and have some foam projects I want to get to work on also.
|
|
|
Post by curufin on Jul 23, 2018 15:31:06 GMT
Meph, Those Tavern Tiles were a test set to see how the new locking clip would work. We ended up going to OpenLOCK. If there is anything you are looking for, just let me know.
|
|
|
Post by Meph on Jul 23, 2018 20:57:08 GMT
Ok so your Tavern Expansion set is what I want to go with next I think. For your other sets I need to really sit down and see what the heck I have. That is the problem with all of these PrintableScenery kickstarters, openforge pieces, truetiles kickstarter, Forest of Oakenspire kickstarter, etc....I have so many STLs that I dont know where to start and what is compatable with what these days.
I will figure it out. I see Printable Scenery stuff is now openlock compatible now also but it appears that they expect me to repurchase the items I bought on kickstarter that have now been upgraded.
It does look like you have been busy though. I think there are a bunch of your sets I am going to need. Probably just take them one at a time and buy when i'm ready to print.
|
|
|
Post by Meph on Jul 23, 2018 21:23:58 GMT
Meph, Those Tavern Tiles were a test set to see how the new locking clip would work. We ended up going to OpenLOCK. If there is anything you are looking for, just let me know. So looking through my stuff I was thinking about printing the water tiles. Now that you went to openlock did you end up upgrading all the tile sets or how does it work. I still have all the original STL files from the TT set.
|
|
|
Post by curufin on Jul 24, 2018 13:28:15 GMT
Meph, Those Tavern Tiles were a test set to see how the new locking clip would work. We ended up going to OpenLOCK. If there is anything you are looking for, just let me know. So looking through my stuff I was thinking about printing the water tiles. Now that you went to openlock did you end up upgrading all the tile sets or how does it work. I still have all the original STL files from the TT set. We haven't upgraded the Water set. The water tiles don't have enough 'base thickness' to add an OpenLOCK clip to them. The Wall clips still work an all the tiles (original and OpenLOCK). In the last year we have seen an insane amount of new gaming models on the market (both free and paid files). There are tons of new designers and companies that are doing brilliant work for the community. It really is an awesome time to have a 3d printer.
|
|
|
Post by Meph on Sept 24, 2018 2:09:52 GMT
|
|