|
Post by wilmanric on Apr 5, 2017 18:23:33 GMT
If you have any interest, post a picture or write up a description of something and I'll try to design it. I'll post the model on Thingiverse. My skills don't align well with the design of an individual mini, though I have mashed-up some bigger models. I'm much better at things, props and set pieces. Post a reply -- include pictures if you'd like -- and I'll see what I can do.
|
|
|
Post by Wyloch on Apr 5, 2017 19:13:54 GMT
A dungeon wall with tortured faces half-emerging from it and various angles, as if the wall is a half-breached window to the spirit world.
|
|
|
Post by tauster on Apr 5, 2017 19:42:31 GMT
Love that idea. Could taht wall be designed in such a way that it can be used as dungeon floor? Then you'd have a trap that grabs the party and draws them to the spirit world. Instant planewalking adventure!
|
|
|
Post by wilmanric on Apr 5, 2017 22:15:44 GMT
Love that idea. Could taht wall be designed in such a way that it can be used as dungeon floor? Then you'd have a trap that grabs the party and draws them to the spirit world. Instant planewalking adventure! tauster Wyloch -- I'll work on a wall and a floor TONIGHT 4/5/17!
|
|
|
Post by wilmanric on Apr 6, 2017 3:14:00 GMT
Love that idea. Could taht wall be designed in such a way that it can be used as dungeon floor? Then you'd have a trap that grabs the party and draws them to the spirit world. Instant planewalking adventure! tauster Wyloch -- I'll work on a wall and a floor TONIGHT 4/5/17! Here you go guys! www.thingiverse.com/thing:2230550
|
|
|
Post by wilmanric on Apr 6, 2017 17:56:33 GMT
Love that idea. Could taht wall be designed in such a way that it can be used as dungeon floor? Then you'd have a trap that grabs the party and draws them to the spirit world. Instant planewalking adventure! tauster Wyloch -- I'll work on a wall and a floor TONIGHT 4/5/17! I printed up a wall and a floor section last night. I'll paint them up and post pics.
|
|
|
Post by Sam on Apr 6, 2017 18:15:19 GMT
Scatter terrain for a torture room: bench or table with tongs, clamps, knives; a rack like in Hero Quest; a iron maiden; wall section with chains and cuffs; or pillar with chains and cuffs.
|
|
|
Post by wilmanric on Apr 6, 2017 19:14:52 GMT
a rack like in Hero Quest; Sam, What do you suppose the dimensions are of the rack? 40mm (80% of 2") by 30mm?
|
|
|
Post by Sam on Apr 6, 2017 20:42:34 GMT
The length is about right, but I don't think it is that wide. Thinking 1 3/4"x 3/4".
|
|
|
Post by wilmanric on Apr 6, 2017 22:01:51 GMT
The length is about right, but I don't think it is that wide. Thinking 1 3/4"x 3/4". Whatcha think so far?
|
|
|
Post by Draklith on Apr 7, 2017 14:24:20 GMT
I need a gear printed for my rotating round room / battle arena / swamp / river / drawbridge thingie
the issue is, I don't have a 3D printer
The gear needs to be 13.5 inches in diameter, but it can be quartered into four pieces then printed in four pieces, and I can cement it later
All I need is the teething of the gear not the middle part, 'cause it will be used on the outside rim of a round room I have built
If I mail you a gear, could you print this? I would make it worth your while
|
|
|
Post by lordmorbius on Apr 7, 2017 15:00:59 GMT
Scatter terrain for a torture room: bench or table with tongs, clamps, knives; a rack like in Hero Quest; a iron maiden; wall section with chains and cuffs; or pillar with chains and cuffs. Hmmm....Kinky....
|
|
|
Post by wilmanric on Apr 7, 2017 15:02:55 GMT
I need a gear printed for my rotating round room / battle arena / swamp / river / drawbridge thingie
the issue is, I don't have a 3D printer
The gear needs to be 13.5 inches in diameter, but it can be quartered into four pieces then printed in four pieces, and I can cement it later
All I need is the teething of the gear not the middle part, 'cause it will be used on the outside rim of a round room I have built
If I mail you a gear, could you print this? I would make it worth your while
Do you mean email me a file to print the gear? I don't know. I'd have to look at the file and see how it would fit on my printer. PM me.
|
|
|
Post by wilmanric on Apr 7, 2017 15:14:11 GMT
So, I printed one. It's not painted yet (obviously.) As a result, I've scaled the rope up a bit, and the manacles. I've also raised the legs by 3-4mm. I'm going to call it done. www.thingiverse.com/thing:2234086Enjoy!
|
|
|
Post by wilmanric on Apr 7, 2017 16:08:08 GMT
|
|
|
Post by wilmanric on Apr 7, 2017 16:54:32 GMT
Here are some pillars with chains. One version has bones on the base. I tried adding tops to the pillars, but that made the chains hard to see. www.thingiverse.com/thing:2234361
|
|
|
Post by Sam on Apr 7, 2017 18:09:49 GMT
Nice looking stuff. Good job!
|
|
|
Post by wilmanric on Apr 7, 2017 19:50:47 GMT
|
|
|
Post by The Mad Poet on Apr 7, 2017 21:26:22 GMT
This is something I have totally wanted to buy in the past, but now that I have a printer it would make life SOOO much easier to print them. Any chance they could be recreated?
|
|
|
Post by margaret on Apr 8, 2017 5:14:52 GMT
It's just a flat horse silhouette with a flat disc added. I am guessing the horse plastic for these must be flexible, so that the disks can be snapped in to lock. But you could make just circular disks and glue them in. Of course, my drawing skills, both on paper and digital, have never been good enough to do animals, so it's only somewhat simpler than drawing a fully 3D horse.
|
|