|
Post by jennifer on Mar 28, 2016 14:20:54 GMT
|
|
|
Post by l7arkness on Mar 28, 2016 15:21:36 GMT
Let me know that sounds cool
|
|
|
Post by jennifer on Apr 1, 2016 3:00:21 GMT
Let me know that sounds cool This filament seems to be doing fine. Printed out a 2 1/2 hour .2 layer height job with no problems. Not bad for $9.99 including shipping for 1kg I see some white of the same brand for $11.99 now. Several colors for $11.99 on ebay. (free shipping). If I can get away with it I am not going to spend more than $12 a roll on filament from now on. I paid twice as much for the hatchbox (which is good stuff I know). I took the calipers to this red roll and the diameter of the filament was between 1.74 to 1.76 mm it seems. so pretty good. altoids tin insert: (taken with $4.50 ebay PS3 cam on Raspberry Pi)
|
|
|
Post by jennifer on Apr 22, 2016 0:14:15 GMT
This $10 roll of filament is working just fine. No problems yet
|
|
|
Post by wilmanric on Apr 24, 2016 0:16:34 GMT
I continue to buy Hatchbox PLA in black. It just works. I've ordered a spool of transparent orange PLA (FIRE!!!) and it should arrive tomorrow. I'll give it a go and see how that works...
|
|
|
Post by wilmanric on Apr 24, 2016 0:18:08 GMT
This $10 roll of filament is working just fine. No problems yet I'm intrigued. I'll check into the filament you are using -- maybe for red color...
|
|
|
Post by jennifer on Apr 24, 2016 0:26:59 GMT
Have you tried excelvan yet? I am having zero problems with it on my Wanhao I3 V2 / Maker Select V2. I see they ahve white for $11.99 on ebay free shipping.
How much do you pay for hatchbox.. last one I got (in black) was like twice the cost.
|
|
|
Post by wilmanric on Apr 29, 2016 2:18:46 GMT
Have you tried excelvan yet? I am having zero problems with it on my Wanhao I3 V2 / Maker Select V2. I see they ahve white for $11.99 on ebay free shipping. How much do you pay for hatchbox.. last one I got (in black) was like twice the cost. Sorry. $26? It's a lot more than you are paying. I need to check out excelvan...
|
|
|
Post by jennifer on May 1, 2016 13:51:48 GMT
Have you tried excelvan yet? I am having zero problems with it on my Wanhao I3 V2 / Maker Select V2. I see they ahve white for $11.99 on ebay free shipping. How much do you pay for hatchbox.. last one I got (in black) was like twice the cost. Sorry. $26? It's a lot more than you are paying. I need to check out excelvan... Some people have told me the quality of excelvan isn't that great and that the diameter was off. But the diameter wasn't off on the roll I got and I haven't had any problems with it yet. Just wanted to throw that out there. I've only used about 1/3rd of the roll as well -- but so far absolutely no problems. Worth a shot anyways. I see lots of different excelvan rolls for $11.99 on ebay with free shipping -- every so often you'll see a $10 roll.
|
|
|
Post by wilmanric on Jul 23, 2016 16:14:42 GMT
|
|
|
Post by jennifer on Dec 17, 2016 0:33:03 GMT
Just bought this 1.75mm black PLA filament for $14.99, including shipping, from ebay. I'll let you know how it goes. www.ebay.com/itm/262750396615
|
|